| Product Number | Description | R.R.P. Aud |
| SE4 |
Dry niche underwater spa light. For spas with access to dry area at the back of the light for servicing. Suitable for fibreglass or acrylic spas. Light supplied with five different coloured, interchangeable lenses. Colours supplied: Blue, Green, Red, Magenta and Clear. 12 volt - 35 watt. 2 metres of 1.5mm2 cable. Diameter: 85mm. Projects 25mm into spa interior. |
$242.69 |
Spa Electrics have been manufacturing 12volt 100watt Halogen underwater lights for over 30 years.
These lights are available in two different styles to suit your needs: The flush mounted light and the surface mounted light.
Our globes are produced to the highest quality standards to ensure a long burn life and powerful water penetration, providing a
wide spread of light and a beam length of up to 8 metres. The average lamp life is approx 1200 hours.
To maximize the lamp life of your Halogen globe your light should be turned on regularly, lack of use can
potentially damage the globe and shorten its life.
It is essential that you do not turn a Halogen light on out of water. The globe burns white hot and you will cause damage to your light's seal and over a
very short period of time cause the light to melt or deform, when this happens it enables water to enter the light cavity, destroying your Light.
Only one Light is to be used with one Spa Electrics LV-100 12 Volt transformer. If you are planning to use 2 or more lights a more cost effective way
of installing your lights is to order an LV-200 transformer, this will allow you to connect two Lights to one transformer.
Unlike the Ceramic Light Engine it is not the lamp which emits the colour it is actually the lens. So you will also need to
choose the lens colour that you would like your pool water colour to be.
This is the first light ever on the market with a detachable plug for ease of servicing.
These lights are available in two different styles to suit your needs: The flush mounted light and the surface mounted light.
Our globes are produced to the highest quality standards to ensure a long burn life and powerful water penetration, providing a
wide spread of light and a beam length of up to 8 metres. The average lamp life is approx 1200 hours.
To maximize the lamp life of your Halogen globe your light should be turned on regularly, lack of use can
potentially damage the globe and shorten its life.
It is essential that you do not turn a Halogen light on out of water. The globe burns white hot and you will cause damage to your light's seal and over a
very short period of time cause the light to melt or deform, when this happens it enables water to enter the light cavity, destroying your Light.
Only one Light is to be used with one Spa Electrics LV-100 12 Volt transformer. If you are planning to use 2 or more lights a more cost effective way
of installing your lights is to order an LV-200 transformer, this will allow you to connect two Lights to one transformer.
Unlike the Ceramic Light Engine it is not the lamp which emits the colour it is actually the lens. So you will also need to
choose the lens colour that you would like your pool water colour to be.
This is the first light ever on the market with a detachable plug for ease of servicing.
| • | Suitable for concrete or fibreglass pools. |
| • | Innovative Detachable Plug, easy connection and disconnection of light. |
| • | 18m of heavy duty 2.5 sq mm cable to reduce voltage drop and ensure maximum light output. |
| • | Interchangeable coloured lenses available in Blue, Green, Red, Magenta and Clear. |
| • | Choice of Rim colours including White, Ivory, Taupe, Grey or Black to match your pool or spa interior. A Stainless Steel Dress Ring is available as an optional extra. |
| • | Compact diameter 164mm for concrete or 174mm for fibreglass installation. |
| • | Recessed design for minimal projection into the pool, only 18mm for concrete and 22mm for fibreglass installation. |
| • | Extra low voltage - High quality 12 volt, 100 watt quartz halogen globe with ceramic connector. |
| • | Slotted rim allows water to flow around the light eliminating stagnant water and to aid in cooling. |
| • | Light locked into position with bayonet tabs for easy servicing. |
| • | Unique electrical connection so that power cable does not intrude into light cavity - eliminates possible source of water entry. |
| • | IPX8 waterproof rating. |
| • | Designed and manufactured in Australia. |
| • | Patents Apply. |
WN250 Light.
| Product Number | Description | R.R.P. Aud |
| WN 250 |
Wet niche underwater pool and spa light with mounting kit for concrete installation. Diameter 164mm. Projects 18mm into pool or spa. For use with weatherproof transformers product numbers LV100-12 or LV200-12. |
$297.06 |
| WN 250 F |
Wet niche underwater pool and spa light with mounting kit for fibreglass installation. Diameter 174mm. Projects 22mm into pool or spa. For use with weatherproof transformers product numbers LV100-12 or LV200-12. |
$309.23 |
| WN 2 |
Wet niche / flush mounted underwater pool and spa light. 12 volt, 100 watt Halogen. Includes Niche for concrete installation and mounting ring. Excludes cable and plug. To be used with WNP cable options. (see below) |
$221.50 |
| WN 2F |
Wet niche / flush mounted underwater pool and spa light. 12 volt, 100 watt Halogen. Includes Niche for fibreglass installation and mounting ring. Excludes cable and plug. To be used with WNP cable options. (see below) |
$232.83 |
| • | Wet niche underwater pool and spa light. |
| • | Suitable for concrete or fibreglass installations. |
| • | 12 volt - 35 watt. |
| • | 18 metres of 2.5mm2 cable. |
| • | Slotted rim. |
| • | IPX8 waterproof rating. |
| • | Rim colours: Black, Ivory, White. |
| • | Interchangeable coloured lenses available: Blue, Green, Red, Magenta,Amber or Clear. |
| • | Diameter: 145mm. |
| • | Projects 18mm into pool or spa. |
| • | Designed and manufactured in Australia. |
WN150 Light.
| Product Number | Description | R.R.P. Aud |
| WN 150 |
Wet niche underwater pool and spa light. For use with mounting kit product number WN10 and weatherproof transformer product number LV100-12. |
$264.19 |
SE4 Light.
| • | Safe extra low voltage. |
| • | Light supplied with 5 different coloured, interchangeable lenses. |
| • | Colours supplied: Red, Blue, Green, Magenta and Clear. |
| • | Body Diameter: 85mm. |
| • | Depth: 25mm. |
| • | 12 volt - 35 watt. |
| • | IPX8 waterproof rating. |
| • | Low Maintenance, long life and energy efficient. |
| • | Designed and manufactured in Australia. |
Flush Mounted Halogen Lights.
| Product Number | Description | R.R.P. Aud |
| WNP 18-2.5 | 18 metres of 2.5 sq mm - Cable is supplied with Plug Top. | $100.11 |
| WNP 20-4 | 20 metres of 4.0 sq mm - Cable is supplied with Plug Top. | $137.49 |
| WNP 24-4 | 24 metres of 4.0 sq mm - Cable is supplied with Plug Top. | $168.04 |
Note: WN250 shown with optional Stainless Steel Dress Ring.
WNP CABLE OPTIONS
Lens Colours
Rim Colours
